Plugin de Tren API (IRuntime)

This is the documentation for train plugins. In order to create a train plugin, implement the IRuntime interface from the OpenBveApi.Runtime namespace. In the following, you will find a description of how this interface works.

■ Contenidos

• 1. Vista general
• 2. Function calls
• 3. Playing sounds
• 4. Supporting the AI

■ Vista general

Las siguientes funciones son llamadas en este orden cuando el plugin ha ha sido cargado:

• Load
• SetVehicleSpecs
• Initialize
• SetPower
• SetBrake
• SetReverser
• SetSignal

Las siguientes funciones pueden ser llamadas en cualquier tiempo:

• SetPower
• SetBrake
• SetReverser
• KeyDown
• KeyUp
• HornBlow
• DoorChange
• SetSignal
• SetBeacon
• PerformAI

Las siguientes funciones son llamadas cuando el plugin es deshabilitado:

• Unload

● Llamados a las funciones

La siguiente es una lista de todos los llamados de función a lo largo con explicaciones en su conducta.

bool Load(LoadProperties properties)

Esta función es la primera en ser llamada antes que el plugin ha sido cargado. Cuando esta función se dispara dentro del plugin, una llamada similar a Unload sera efectuada cuando el plugin se descargue.

Argumentos:

LoadProperties (clase):

PlaySound (función):
Ve la sección en playing sounds.

AISupport (enumeración):

Valor de retorno:

If your plugin uses external configuration files, open files relative to the properties.PluginFolder or properties.TrainFolder. The difference between the two can be best visualized when the plugin is in a shared folder: Files relative to the plugin folder are common for all trains that use the plugin, while files relative to the train folder are specific to each train. The plugin folder is simply the folder in which the plugin is stored.

Initialize the properties.Panel array to any size and with any startup values you need. The array is processed after every call to Elapse by the host application in order to update custom panel indicators. Developers of the panel2.cfg file can query these values with the atsi variable, while developers of the panel.animated file can query these values with the pluginState[i] variable.

The properties.PlaySound function can be used at any time to play sounds. This callback function returns a handle that you can use to track if the sound is still playing, to change its volume and pitch, or to stop it. Please also see the section on playing sounds.

Set properties.AISupport to a value other than AISupport.None if you want your plugin to support the AI. Please also see the section on supporting the AI.

You should return true as the return value when loading succeeded. If, on the other hand, you want to abort loading the plugin, for example because an external configuration file could not be found, return false and set properties.FailureReason to a human-readible string that explains why loading failed.

void Unload()

This function is the last to be called before the plugin is unloaded.

void SetVehicleSpecs(VehicleSpecs specs)

This function is called after Load to inform the plugin about the specifications of the train.

Argumentos:

VehicleSpecs (class):

BrakeTypes (enumeration):

For more information about the meanings of the notches, see the sections on SetReverser, SetPower and SetBrake.

void Initialize(InitializationModes mode)

This function is called after SetVehicleSpecs and informs the plugin about the mode the safety system should start in. If the safety system in your plugin can be activated or deactivated, you should initialize the state of the plugin accordingly. When the user selects a Jump to station target, this function is also called prior to moving the train to its new location.

Argumentos:

InitializationModes (enumeration):

The initialization mode is set in CSV/RW routes via the Route.Change command. Please note that any value between -2147483648 and 2147483647 can be conveyed to the plugin - the enumeration members are simply meant to standardize the meanings of the initialization modes.

void Elapse(ElapseData data)

This function is called every frame. It informs the plugin about the current state of the train and allows to set the virtual handles.

Argumentos:

ElapseData (class):

VehicleState (class):

PrecedingVehicleState (class):

Speed (structure):

Time (structure):

Handles (class):

The meanings of the notches are explained in the sections on SetReverser, SetPower and SetBrake.

void SetReverser(int reverser)

This function is called when the driver changes the reverser position.

Argumentos:

For reverser, the value of -1 corresponds to backward, 0 to neutral and 1 to forward.

void SetPower(int powerNotch)

This function is called when the driver changes the power notch.

Argumentos:

For powerNotch, the value passed can range from 0 to specs.PowerNotches.

void SetBrake(int brakeNotch)

This function is called when the driver changes the brake notch.

Argumentos:

For trains with the automatic air brake, 0 is RELEASE, 1 is LAP, 2 is SERVICE and 3 is EMERGENCY.

For all other trains without a hold brake, 0 is released brakes, 1 is brake notch B1, 2 is brake notch B2, etc., specs.BrakeNotches is the maximum brake notch, and specs.BrakeNotches+1 is the emergency brake.

For all other trains with a hold brake, 0 is released brakes, 1 is the hold brake, 2 is brake notch B1, 3 is brake notch B2, etc., specs.BrakeNotches is the maximum brake notch, and specs.BrakeNotches+1 is the emergency brake.

Generally speaking, for trains without the automatic air brake, specs.AtsNotch is brake notch B1 and specs.BrakeNotches is the maximum service brake notch. For all types of trains, specs.BrakeNotches+1 is the emergency brake.

void KeyDown(VirtualKeys key)

This function is called when a plugin-specific key is pressed.

Arguments:

VirtualKeys (enumeration):

When making use of plugin-specific keys in your plugin, be sure to release a documentation that includes the virtual names of the keys along with their plugin-specific meanings.

void KeyUp(VirtualKeys key)

This function is called when a plugin-specific key is released.

Argumentos:

VirtualKeys (enumeration):

When making use of plugin-specific keys in your plugin, be sure to release a documentation that includes the virtual names of the keys along with their plugin-specific meanings.

void HornBlow(HornTypes type)

This function is called when a horn starts playing. In case of the musical horn, this function is also called when the horn stops playing.

Argumentos:

HornTypes (enumeration):

void DoorChange(DoorStates oldState, DoorStates newState)

This function is called when the state of the doors change.

Argumentos:

DoorStates (enumeration):

void SetSignal(SignalData[] data)

This function is called when the aspect in the current or in any of the upcoming section changes, or when passing section boundaries. For the current section, it is assumed that no train is currently inside. Only sections until the first red section are reported.

Argumentos:

SignalData (class):

The data array contains one entry per section, where data[0] is the current section, data[1] the upcoming section, and so on. You can inspect the aspect and the distance to each section reported.

Please note that the length of the data array is dynamic. Only sections until the first red section are reported. This means that you need to check the size of the array before querying a particular section.

Please also note that the last section in the data array does not have to be red necessarily. For example at the end of the track, the last section might be green.

In CSV/RW routes, the Track.Section (CSV) or @Section (RW) command is used to create signalling sections. The data.Aspect member corresponds to any of the aspects defined by this command.

void SetBeacon(BeaconData data)

This function is called when a beacon is passed by the front of the train.

Argumentos:

BeaconData (class):

SignalData (class):

In CSV/RW routes, the Track.Beacon (CSV) or @Beacon (RW) command is used to install beacons on the route. Both the beacon type and the optional data set by this command is transmitted to the train plugin along with the distance to the attached section.

Please note that plugins may receive beacon types less than 0. These beacon types are reserved for future use and must be ignored by current plugins.

void PerformAI(AIData data)

This function is called when the AI is performed.

Argumentos:

AIData (class):

Whenever you let the AI perform something, set data.Response to a value other than AIResponse.None. Please also see the section on supporting the AI.

■ Playing sounds

You can play custom sounds from within your plugin. Custom sounds need to be configured inside the sound.cfg file before they can be used by the plugin. In order to play such sounds, keep a reference to the PlaySound function that is passed in the Load call. You can then start playing sounds at any time by calling this function:

SoundHandle PlaySound(int index, double volume, double pitch, bool looped)

Argumentos:

Valor de retorno:

When you call the PlaySound function, a handle will be returned that you can use to later check if the sound is still playing, in order to change the volume or pitch, or to stop playing the sound. If you play a sound in a loop, you must keep the handle in order to subsequently stop the sound - otherwise it would play indefinately. The handle returned by PlaySound is of the following form:

SoundHandle (class):

Please note that depending on the implementation by the host application, sounds that are not in audible range may not be played at all.

Please also note that the handle returned might be a null reference in the case the host application could not play the sound, for example because the file could not be found.

■ Supporting the AI

Usually, the host application performs the AI. However, your plugin might require special operation precedures which the built-in AI cannot know of. For this reason, you can complement the built-in AI by performing operation procedures specific to your plugin. Before considering to support the AI, however, you should understand what the AI is intended to represent: a human being standing or sitting in the cab, operating levers and pressing buttons, just like the player. This means that the AI must not operate 6 levers and 12 buttons simultaneously, but only do one thing at a time.

If you want to support the AI, first set data.AISupport inside the Load call to AISupport.Basic. Whenever the host application performs an AI round, a call to PerformAI will then be made inside the plugin. The plugin can then decide to let the AI perform an action, or to pass and let the host application perform an action. Different kinds of actions can take different amounts of time, so whenever the plugin lets the AI perform an action, it will also set the time it takes before the next action can be performed.

It is important to understand that unless your plugin also simulates a full ATO with automatic stopping at stations, you must let the host application perform the AI for most of the time and only intervene if absolutely necessary, for example in order to start the engine, to acknowledge a vigilance device, etc. Whenever this is the case, react to the PerformAI call appropriately:

void PerformAI(AIData data)

Argumentos:

|

Example:

if (AtsAlarm) {  
  /* The driver needs to cut power and apply the brakes,  
  * then press the virtual S key.*/  
  if (data.Handles.PowerNotch > 0) {  
    /* We change only by one notch at a time. */  
    data.Handles.PowerNotch -= 1;  
    data.Response = AIResponse.Short;  
  } else if (data.Handles.BrakeNotch < 2) {  
    /* We change only by one notch at a time. */  
    data.Handles.BrakeNotch += 1;  
    data.Response = AIResponse.Short;  
} else {  
    /* We simulate a key press here. */  
    KeyDown(VirtualKeys.S);  
    data.Response = AIResponse.Medium;  
  }  
} else if (AtoActive) {  
  /* Our ATO does not require driver interaction, so  
  * let's prevent the built-in AI from doing anything. */  
  data.Response = AIResponse.Long;  
} else {  
  /* Let the host application perform a default action  
  * such as braking for signals or stations. */  
  data.Response = AIResponse.None;  
}

if (AtsAlarm) {  
  /* The driver needs to cut power and apply the brakes,  
  * then press the virtual S key.*/  
  if (data.Handles.PowerNotch > 0) {  
    /* We change only by one notch at a time. */  
    data.Handles.PowerNotch -= 1;  
    data.Response = AIResponse.Short;  
  } else if (data.Handles.BrakeNotch < 2) {  
    /* We change only by one notch at a time. */  
    data.Handles.BrakeNotch += 1;  
    data.Response = AIResponse.Short;  
} else {  
    /* We simulate a key press here. */  
    KeyDown(VirtualKeys.S);  
    data.Response = AIResponse.Medium;  
  }  
} else if (AtoActive) {  
  /* Our ATO does not require driver interaction, so  
  * let's prevent the built-in AI from doing anything. */  
  data.Response = AIResponse.Long;  
} else {  
  /* Let the host application perform a default action  
  * such as braking for signals or stations. */  
  data.Response = AIResponse.None;  
}